Draft
8 min read

Concrete Recycling with the McCloskey J45 Jaw Crusher and R155 Screener

See the McCloskey J45 Jaw Crusher and R155 Screener work together to turn recycled concrete into 57 stone, entrance stone, paver base and other usable material.

Share this article:

How the McCloskey J45 and R155 Work Together for Concrete Recycling

‍

Recycling concrete is about more than reducing material into smaller pieces. An efficient operation needs the right combination of crushing and screening equipment to move material smoothly from the initial feed to clean, separated finished products.

The McCloskey J45 Jaw Crusher and McCloskey R155 Screener make a powerful combination for processing recycled concrete.

Working together, these machines can take concrete rubble and transform it into reusable aggregate products suitable for a variety of construction and site applications.

Watch the McCloskey J45 and R155 in Action

See the full crushing and screening process in the video below:

McCloskey J45 Jaw Crusher for Primary Crushing

The process starts with the McCloskey J45 Jaw Crusher, which handles the primary crushing stage.

Concrete rubble is fed into the crusher, where larger pieces are reduced into manageable material that can then move to the screening stage.

For contractors, recyclers and aggregate producers, using a mobile jaw crusher gives crews the ability to process concrete directly on the jobsite or at a recycling facility instead of treating demolished concrete strictly as waste.

‍

McCloskey R155 Screener for Material Separation

After the concrete has been crushed, the material moves to the McCloskey R155 Screener.

The screener separates the crushed concrete into different finished products based on material size. This allows one recycling operation to produce several usable aggregate products from the same incoming material.

In this setup, the J45 and R155 produce:

  • 57 stone: approximately 0.5" to 1"
  • Entrance stone: approximately 3" to 6"
  • Paver base: 3/4" minus

The result is a clean material flow from the initial concrete feed through crushing, screening and into separated finished piles.

‍

Turn Recycled Concrete Into Usable Material

A crushing and screening setup like the McCloskey J45 and R155 can help contractors recover value from concrete that might otherwise need to be hauled away.

Depending on project requirements, processed recycled concrete can be used for applications such as base material, construction entrances, site preparation and other aggregate needs.

Producing multiple material sizes also gives operators greater flexibility when deciding how processed material will be reused or distributed.

‍

Find McCloskey Crushers and Screeners at RPM

RPM Crushers & Screens offers a selection of new and used McCloskey crushers and screeners for contractors, recycling operations and aggregate producers.

Whether you need equipment for concrete recycling, demolition material processing, aggregate production or another crushing and screening application, RPM can help you find the right machine for the job.

View RPM's McCloskey equipment:
https://www.rpmcrushersandscreens.com/manufacturers/mccloskey-international

‍

Related Crushing, Screening & Recycling Resources

Looking for more examples of crushing, screening and material processing equipment in action? Explore these resources from RPM Equipment:

‍

Need Crushing or Screening Equipment for Your Next Project?

Buying equipment isn't the only option.

RPM also offers construction equipment rentals for contractors who need additional crushing or screening capacity for a project without purchasing another machine.

View equipment available for rent:
https://www.rpmcrushersandscreens.com/construction-equipment-for-rent

Have questions about the McCloskey J45, R155 or another crusher or screener?

Call RPM Crushers & Screens today at (833) 862-7874.

‍

RELATED BLOG

Posted
8 min read

Thunder Creek SLT690 Service & Lube Trailer Walkaround

Watch the Thunder Creek SLT690 walkaround and explore its 690-gallon combined fluid capacity and service options.

Read More
Equipment Guides

Keep Equipment Moving with the Thunder Creek SLT690

When equipment needs service on the jobsite, having fluids and maintenance equipment close at hand can help crews get back to work sooner. The Thunder Creek SLT690 Service & Lube Trailer brings a configurable mobile service setup to the field.

Explore RPM Equipment’s Thunder Creek fuel, service, and lube trailer lineup to compare models for field support.

RPM Equipment sales team gives us a walkaround of the SLT690 in the video below.

SLT690 Capacity, Specifications, and Options

The SLT690 offers 690 gallons of combined fluid capacity. Its tanks can be configured for service fluids such as oil, coolant, reclaim, and diesel according to the needs of the operation. Available options include DEF delivery, grease, and power systems.

Key trailer specifications include:

  • 690 gallons of combined fluid capacity
  • Dual 7,000-pound torsion axles
  • 235/80 R16 tires
  • Approximately 7,200-pound empty weight

For photos and unit details, view the 2025 Thunder Creek SLT690 #T876 listing.

Fluid storage and optional equipment depend on the trailer’s configuration. Ask the RPM team about the features included on a specific unit.

For more product details, see Thunder Creek’s Service & Lube Trailer overview.

Find a Thunder Creek SLT690 at RPM Equipment

Ready to bring service closer to your equipment? View Thunder Creek SLT690 trailers listed by RPM Equipment, or call (833) 862-7874 to discuss availability and the configuration that fits your operation.

‍

Posted
8 min read

On Site with Cemex and the New Böhringer B50i-RGF Impact Crusher

Cemex adds a Böhringer B50i-RGF impact crusher and Masaba radial stacker for high-production aggregate processing and stockpiling.

Read More
Equipment Guides

‍

A High-Production Crushing System for Cemex

Congratulations to Cemex on its purchase of the Böhringer B50i-RGF impact crusher, paired with a Masaba 80-foot by 42-inch radial stacker.

This high-production system is built for demanding aggregate applications, delivering the throughput, efficiency, and reliability operators need to keep material moving.

From excavator loading through final stockpiling, the B50i-RGF and Masaba conveying system provide an effective combination for high-volume crushing operations.

Böhringer B50i-RGF Key Specifications

  • 50-inch by 36-inch feed opening
  • 550-horsepower CAT C15 engine
  • Producing three-inch-minus lime rock
  • Production capacity of up to 1,200 tons per hour*

The B50i-RGF combines a large feed opening with a high-performance impact crusher and a compact, straightforward design. Its Masaba radial stacker helps move finished material away from the crusher and build organized stockpiles efficiently.

This configuration can help reduce material handling, limit unnecessary loader movement, and keep the complete operation productive.

Thank You to Cemex and Böhringer

RPM Equipment extends a special thank-you to the teams at Cemex and Böhringer for their partnership and trust. We look forward to supporting the equipment and the people operating it.

Learn more about the Böhringer B50i-RGF, view the available B50i-RGF impact crusher listing, or browse RPM Equipment’s complete selection of crushers for sale.

For availability, pricing, or crushing-equipment assistance, call RPM Equipment at (833) 862-7874.

*Production capacity varies based on material characteristics, feed size, machine settings, and operating conditions.

‍

Posted
8 min read

Choose the Right ARJES Shredder Shafts for Your Application

RPM Equipment carries ARJES shredder shafts designed for concrete, metal, wood waste, construction debris, and other demanding materials.

Read More
Equipment Guides

‍

ARJES Shredder Shafts for Changing Material Streams

RPM Equipment carries a full lineup of ARJES shredder shafts to help operators get the most from their machines and adapt to changing material streams.

Available configurations include:

Each configuration is designed to help optimize shredding performance for specific materials and production requirements.

One Shredder, Multiple Applications

The versatility of ARJES shredders allows operators to process a wide range of materials, including:

  • Concrete and C&D waste
  • Scrap metal
  • Green waste and wood waste
  • Commercial and industrial waste
  • Railroad ties
  • Construction debris
  • Asphalt and mixed materials
  • Bulky waste

Selecting the appropriate shaft configuration can improve production, control finished material sizing, and deliver better performance for application-specific demands.

Interchangeable shafts also give operators the flexibility to adapt their equipment as incoming materials and project requirements change.

Find the Right Shaft Configuration

RPM Equipment can help you identify the correct shaft configuration for your ARJES shredder, material stream, and production goals.

Browse our available ARJES shredder shafts or view our complete selection of shredders for sale.

For availability, compatibility, or pricing, call RPM Equipment at (833) 862-7874.

‍

Ready to Get Started?

Call 24/7 or schedule a callback with our experts.
Why buy from RPM Equipment:
Heavy Equipment Experts
Flexible Financing
Trusted Local Technicians